NB North Bayou Dual Monitor Desk Mount Stand Full Motion Swivel Computer Monitor Arm Fits 2 Screens up to 32'' with Load Capacity 6.6~26.4lbs for Each Monitor G75

This is the best thing I've ever bought! It is so sturdy and VERY functional. Very well designed/engineered, and it is BIG! It reaches FAR out and FAR up. It works very well - smoothly adjustable all the way up, out, and over. I can stand up and read my monitors (2) or I could remove one monitor and mount a keyboard or wireless keyboard. I put it up high to stand and read music to play trumpet. I sit and type and can move both monitors anywhere I want. Very smooth and sturdy. Not real pretty and not real skimpy - but definitely not wimpy, so it doesn't adjust position super-easy like a piece of flexible plastic - but it goes anywhere and stays in place. It mounts 2 ways - through the desk or clamped to the desk. I have it mounted on a 27" high desk (best keyboard height for me) and it reaches out to me 26". It goes up to 49" easily (mid point of monitor), so the top of my monitor goes up to 60" and tilts 180 degrees X 180 degrees X 180 degrees. This was a bonus that I didn't discover until I mounted it (not advertised as a sit-to-stand desk - those are pricey). I am 6 foot tall so I would mount it one foot higher to make it a better height for me or on a podium/lectern for a performance or lecture. This thing is great! My eyes love it and my neck loves it and my body loves it. I can sit or stand where I want and pull the monitor to me. My eyes are old and require reading glasses, but with this monitor mount I don't need to wear glasses to read! Buy this one!!! Cheers!

This monitor mount is actually pretty awesome! i was able to assemble the mount and have my monitors mounted withing about 15 minutes. i seen a lot of people talking about how the monitors shake when their desk moves, i do not seem to have this issue. (If you are having this issue try adjusting the tension on the shocks so they move less) After assembling the monitor mount make sure you adjust the tension on the arms so that when you move your monitors they stay where you move them. If you do not they will fling up in the air like a slingshot. I love that there is a space in the arms of the mount to hide the monitor cables although i do not use them. I feel like if i feed the wires through the arms like it is reccommended they will get caught, or there will not be enough slack to move the monitor so i just left them out. The 2 USB ports on the base are very nice and are just basic usb cables that fasten to the bottom with a few screws and a plastic piece. I like particularly that these are loose USB cables as you can use a fast charge connector on one and plug it into the wall, and the other i have plugged into my PC for quick access to plug a drive in. Overall im very happy with the monitor mount, i dont think i have come across a con just yet, although there is one thing people may consider a con that does not bother me particularly. The arms on the mount do not move very well unless you have your desk pulled away from the wall quite a bit. That being said, i reccommend this monitor mount for anyone who constantly wants to adjust positioning of their monitors, or someone who has 2 different monitors and jut wants them to sit side by side evenly. Good purchase for the price. Update: 2 years later this monitor mount is still holding strong, the usb cables that came did have to be replaced because they weren’t very high quality, but the mount itsself has been great!

So i got it for my gaming desk the build quality and finish is great. BUT if you have a desk butted up against the wall you cant have the monitors pushed all the back and touching you have to come forward some due to the design of the arms will hit the wall behind the desk. If you can manage that than your golden.

For the price, I am shocked. The arms are really sturdy and well made. Lots of range of motion. Super easy to put together. The included USB extension cables were an incredibly nice touch. Being able to have two USB ports from the computer ported to the base of the arm mount is awesome. Really clever design on how it works too. It has built in cable management trays that are very nice too. I have two of their single monitor arm mounts and I love them, but the cable trays, though work great, weren't my favorite. These on the dual arms seem to be an updated design that is phenomenal. I would recommend this product 10 times over.

I needed a dual monitor mount to go on my mobile workbench in my shop. I first tried a Huanuo and the arms were flimsy. It could hold the weight of my screens (two 32s) but any time I moved they oscillated quite a bit. I have a NB single mount in my house and love it, so I figured I'd give the dual a try. It's fantastic, and the price point is perfect. It didn't take me long to assemble it and install it in place of the Huanuo, get the screens on, and get everything dialed it. It has more than enough strength to lift my monitors. One Week Update: This thing is awesome. After a couple days of minor tweaks here and there, I've gotta say that this thing is fantastic. It holds a pair of MSI MAG322CQR 32" monitors effortlessly, and once I got everything perfectly placed I really tightened down the set screws and it is SOLID. The Huanuo it replaced is absolutely laughable. This is fantastic, and I wouldn't hesitate to buy another at the drop of a hat.

Work great!

Bout this back in Jan 2022, and realized I never left a review. I've been using this for for 4 years, and I've never had an issue with it. Very durable, and worth the money.

I have a bad habit of opening the box and not bothering with the instructions until im to a point i have to. Didnt have to here. Everything was pretty obvious on how to put together. Very sturdy product, and the angles you can do with these, WOW. Feel like an amusment park ride with all the crazy movement you can places them in. One thing did like was the way the mounting worked. Put the mounting brackets on the monitor/device and you hang it and then screw in. Wish more setups had that hanging setup. -- I dont often write positive reviews.. this was a joy to setup.

お買い得価格なモニターアームを買い始めてこれで12個目。 この製品はスタンダードなガススプリング式モニターアームと比べて10cmほど長いモデル。まだ設置場所のDIYが済んでないから仮組み仮設置だけど、剛性もしっかりしててグラつかないし、ガススプリングもちゃんと動いてて、2つのモニターアームの個体差もそう大きくないしいいね。 あとスプリングアームとモニタープレートの取り付け部がM8ボルトを使った組み立てだから、ユーザーが調節できる。HUANUOのHNSS8とか物によっては取り付け済みで、緩かったりキツすぎてもユーザーが調節できないのもあるからその点でもいいね。 同時期に買ったHUANUOのシングルモニターアームのHNSS7。よく似た形だなと思ってスプリングアームを見比べると瓜二つ。延長アームも瓜二つ。モニタープレートも瓜二つ。というか差し込める。入れ替えても問題なく動く。 NB NORTH BAYOUのシングルのF100AとデュアルのF195A。アマゾンのページでは最大伸長65cm。耐荷重3-12kg。付属の説明書とスプリングアームには3-12kgと記載。 HUANUOのHNSS7。アマゾンのページでは最大伸長70cm。耐荷重3-9kg。でも、付属の説明書とスプリングアームには3-12kgと記載。 最大伸長は違うけど、計測位置もそれぞれ違うからそもそも当てにならない。現物は全く同じ。 NB NORTH BAYOUのシングルのF100AとデュアルのF195AとHUANUOのシングルのHNSS7。箱詰めのやり方も似ているし、販売メーカーは違うけど製造元は同じなんでしょう。

A product has to be spectacularly bad or good for me to feel compelled to write a review. This is definitely the latter. I ordered this with a little trepidation, as in my experience Amazon is increasingly awash with inferior products sold by a multitude of Chinese vendors making extravagant – and sometimes comical – claims in their listings. Often these vendors sell the exact same products with different brand names slapped on them, and many seem to get their families and friends to seed the reviews with a goodly number of five stars. On top of that, the brand name North Bayou seemed suspiciously like an attempt by a company to pass off as American. It turned out that this dual monitor stand/arm is fantastic. Considerable effort seems to have been put into the design and engineering of the pruduct; every part, down to the smallest screw, is well made and fits perfectly where it's supposed to. The base, clamp, arms, heads are all solid, move where they should and don't where they shouldn't. There isn't a single imperfection in the black coating. The clever design of the heads (my term for the parts to which the monitors are attached) allowed me to set the whole thing up by myself (ie, I didn't need someone else to hold each monitor as I screwed them into the contraption). Once a monitor is mounted on an arm, a tensioning screw/bolt on the 'elbow' can be adjusted so the arm is balanced and moves neither up nor down. Bolts on the other joints allow them so be similarly adjusted so they will move more or less. Once everything was in place and adjusted, I was able to position each monitor exactly how I wanted without much effort. I really like the fact that the arms extend quite a bit and can hold monitors as high as the tallest person would need them to be for comfortable viewing. I read at least one review saying the monitors wobble with the slightest movement of the desk. This has not been an issue for me with 24-inch monitors and a desk with metal legs and a 2-cm thick top. If I pound the desk or the keyboard, then yes, they wobble a bit, but I believe that to prevent any wobble under such conditions the stand would need to weigh at least twice as much as they do, and already they're not very light. Someone else wrote that this stand is only good if one's desk is not close to a wall, as unless the desk is very deep, the 'elbows' end up sticking out beyond the back of the desk. Well, my desk is right up against a wall, but instead of mounting the base of the stand right across from where I sit, I mounted it near a corner and one of the arms thus extends to hold a monitor in front of me, while the other extends to hold the second monitor to my right. This is how I like my monitors, but if you like to have one to either side of you, then yes, you'd probably need to mount the base aligned with the centre of the desk and the elbows would thus stick out the back. I suspect this would be the case with any stand that has arms that move in so many different ways; only ones with a vertical 'post' coming off the base might be free from this problem, but the arms would likely not allow as much freedom of movement/adjustment.

So far so good. It's a very good monitor mount. Ideal for what I need. The only issue is the fact the mount is 75 and 100. My Samsung has an annoying resess where the vesa mount is which means the mount on this stand overlaps. I simply purchased some spacers to fix this.

Samsung G5 serisi 32” 2 monitörüm var. Bunlar için aldım gayet kullanışlı, memnunum.

Meine 2x 32" Monitore mit je ca. 7.8kg werden spielend gehalten. Es bleibt genug Platz um die Monitore einustellen, die Arme sind also nicht voll ausgestreckt. Mit der Kabelführung kann man selbige sehr schön und ordentlich unter den Tisch führen. Die 2 USB-Anschlüsse im Fuß sind auch ein nettes Feature. Der Zusammenbau war sehr einfach und bis auf einen Kreuzschlitz-Schrauber waren alle 3 Imbussorten für die Befestigung bzw. den Zusammenbau der Arme, Verstellung der Federstärke etc. mit dabei und eine bebilderte Anleitung. Ist kein Hexenwerk und relativ schnell zusammen gebaut. Habe das ganze alleine montiert ohne ein zweites Paar Hände. Die Monitore habe ich an ihrer Unterkante auf den Tisch gestellt und dann den Fuß abgeschraubt, dann die VESA-Halterung angeschraubt und den Arm runter gedrückt und in diese geführt. Hat wunderbar geklappt. Jetzt ist mehr Platz auf dem Tisch, das ganze schaut toll aus und funktioniert hervorragend. Die knapp 100€ die ich bezahlt habe finde ich gerechtfertigt. Die Arme wirken robust, nichts wackelt oder wirkt, als währe die Leistungsgrenze nahe. Die Tischhalterung greift auch gut und gerne 15cm+ dicke Tische oder kann verschraubt werden ohne Klemmen.