Polymaker PA6-CF Nylon Filament 1.75 Black Carbon Fiber Nylon Filament 1.75mm 2kg Spool - PolyMide PA6-CF Warp Free Nylon 3D Printer Filament

PolyMide PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion. Printing settings: Nozzle Temperature: 280-300 ˚C Bed Temperature: 25-50 ˚C (Do NOT exceed 50 ˚C) Printing Speed: 60 mm/s Cooling Fan: OFF PolyMide PA6-CF can be printed on almost any surface with a thin coat of PVA glue or Magigoo PA.

• 🦾 【Stiff & Strong & Heat Resistant】 - Polymaker PolyMide PA6-CF nylon filament 1.75mm is made of 80% PA and 20% chopped carbon fibers. The carbon fiber reinforcement really provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion (Heat Deflection Temperature (ISO 75 0.45 MPa): 215℃).
• 👉 【Wide Application】 - PolyMide PA6-CF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, ESD safe fixtures, drone frame, prosthetics or handles.
• 🧵 【Tangle Free & Resealable Bag】 - Our PA6-CF nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue.
• ⚙️ 【Printing Setting】 - Nozzle: 280-300℃; Bed Temperature: 25-50℃ (Do NOT exceed 50℃); Speed: 30mm/s – 60mm/s; Annealing: 80℃ 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA.
• ⚠️ 【Note】 - It is important to have an abrasion resistant nozzle since there is carbon fiber inside this Nylon filament. PolyMide PA6-CF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so.
• 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beatiful prints and contact us via desertcart anytime you need.