2 x 2.4GHz 6dBi Indoor Omni-Directional WiFi Antenna 802.11n/b/g RP-SMA Female Connector + 2 x 20cm/8" U.FL/IPEX to RP-SMA Pigtail Antenna WiFi Cable

iAqualink 2.0 repair: The original antenna failed due to sun exposure and it fell apart. It was suggested to me that we would need to have the unit replaced at $500 plus labor. After a quick search, I found that this antenna kit was a direct replacement of the damaged antenna.. 10 min of easy work, reconnecting the 2.0 to my wifi and the pool pump was up and running again! Since there are two, I now have a spare for the next time it happens. Great product, works exceptionally well with the Zodiac iAqualink 2.0 wifi interface.

I replaced the internal antenna in my engraver with this one. It connected with this antenna where the oem one didn't. The reception is great.

Fine products

I purchased these as an emergency replacement for the antenna that comes with an ASIAIR Plus. The performance was much poorer than the original supplied antenna, but somewhat better than no antenna at all. At this price I'll keep them around and hope an emergency doesn't occur. I'm rating this 4 star because I don't know if the antenna is even supposed to be appropriate for my device, perhaps it would be fine with other devices.

bought this kit to modify a TP-Link wifi repeater, I found a 2.4ghz only MIMO model for only $15, mounted a receptacle on the wall of our metal building right where I wanted the antenna to poke through the metal. Sighs, the repeater worked great with both antennas in near proximity, but sadly, once I isolated the two antennas with one inside the shop, and one outside, I get very inconsistent results with speed tests, sometimes 1-2Mbps up and 7 down, sometimes 7 up and 2 down. Before my mods, I got 25Mbps every time, up and down. It does work good enough to use for web browsing and 1080 youtube streaming, at least. I wish someone made a wifi repeater that's made to have an antenna mounted through a wall...

I bought these for an ESP32 boards that support these antennas. Great range, very sturdy, and solid materials. Happy for the locking washers. I'm getting a great signal from 10ft, through an exterior wall. The cable length from the antenna to the board is perfect. Other than that, it looks great. I'll definitely be buying these again in the future.

So my iAqualink 2.0 module is mounted on the west side of the house and after 5+ years the antenna was completely cracked and disintegrating. I found a reddit article on using this particular amazon antenna to replace it and really it was quite easy to do. I found that if you put the included nut and flat(ish) washer on the threaded end of the included cable it was the perfect length to go thru the module housing hole and rubber washer for the antenna to screw on and make connection with adequate sealing force on the rubber washer. YMMV but this worked out for me. Take care removing the little barrel connector off the WiFi module and installing the new one. These are easy to damage if you dont get them aligned correctly. Works better than before with much stronger connection.

You do have take apart your current antenna to install. Very straightforward. Excellent replacement.