USB Hub, USB Splitter,USB 4-Port Adapter,Extender for Laptop, PC, MacBook, Mac Pro, Mac mini, iMac, Surface Pro and More (Black-USB 2.0/0.3m)

Works good.. Better to put it somewhere were it won't get bumped. Dongles can get loose.

This thing works just like it should and makes connecting multiple things up in one device beyond convenient. I bought two of the for both my Xbox Series S and Nintendo Switch. Along with that I had added A Pro controller charger, a set of headphones and a separate laptop charger. And for my Series S I got the same deal; a charger for both of my controllers, some headphones and another charger. Only gripes I could possibly have is that they are pretty short so mine just hang off my drawer. The only other one is how firm the ports are and how it’s a little tough to first put them in. Other than that, literally worth every penny!

Nice USB product

Works good, you get what you pay for. All slots work good, indicator light on it to show you its working. Does feel a bit cheap, plastic edge is sharp and unplugging for the usb slots requires a good pull in the right direction whereas most usb slots do not grip your plug in that way. Sometimes bending the main wire more than 90 degrees makes it stop working but other than that no major issue.

Great for travel.

Just what I needed to get all of my devices plugged in ay my home office desk.

Very convenient since my MacBook didn’t have usb ports. I can connect up to 4.

I've been using some of these for an indoor garden, to power some LED sticks, spread across a few schedule-controlled smart plugs, and the connection to the actual charger seems to become unstable, over time. The electricity going through it, despite being on grounded cords, mostly high (for USB charging blocks) amp bricks, appears to be dirty, and it has caused several sticks to become damaged. The splitter is not torqued heavily, although it is at an angle (and held mostly steady with twist wire), but not one in which the tension should be problematic. At first, I thought I had a bad batch of lights, as they occasionally flicker directly in the block, but I noticed that only ones taken OFF these splitters seem to have that problem in less than several months of use, so I suspect the current is unstable. Fiddling with the splitter's input, however, makes it more stable, but only for a limited time, and that's actually the reason I'm on, at the time of writing this -- to look for a replacement, soon. For extremely low-watt usage, it is probably ok, but even a few watts (I believe the light sticks are only like 1-2 watts, each; max of 6-10 sticks per brick, depending on the brick's rating), it appears to cause connectivity issues, eventually resulting in dim lighting (weak current) and/or rapid flickering (which seems to have caused the overheating of the lower-wattage (around 2.1 A) bricks, LED sticks themselves, and eventual damage to the diodes). While I did NOT buy these for data transmission, I can reasonably recommend NOT using these for sensitive low-end electronics without some sort of built-in voltage/power modulator (a phone? Probably fine, as they have capacitors and adjustable input, and the worst you might get is, "charging slowly". But unregulated electronics? Doubt it, unless I just got unlucky). For reference, they are kept on, like 2-6 hours at a time, with 10-15 minute off cycles, throughout the night (all night cycles are around 2 hours. I only leave them on longer, if I manually turn then on, during rainy/cloudy days). In the first pic, you can see how bright the sticks are supposed to be. That is an old DC-assisted brick I repurposed, when I needed faster USB support. In the second, you can see how dim the sticks are, on *this* hub, connected to 1 output of a 3.1 A brick. I had only just adjusted the input, barely 2 hours ago, at the time these pics were taken. This hub has been plugged into multiple brick ports, at least 2 different bricks, and even that other hub. It still does this. This one is 1 out of 2 hubs I bought from this brand. The other still seems mostly fine, and it is never moved, at all. That's why I believe the issue is material quality, and that the pins are not very durable. For comparison, the hub that doesn't (yet?) experience this issue, the one that is never moved, is in the third pic, and the sticks are dramatically brighter.

Perfect for laptops with minimal usb ports

Sanırım hayatında aldığım en adi mal filan

حجمه مناسب ويؤدي الغرض

Simple, good price point, and effective... I required tis for certain devices since they only accepted/ worked when plugged into a USB2 connection..it is easy to overlook since the majority of hubs are USB3 and many peripherals have no issues connecting to them...there are still the few...that aren't compatible...which leave you scratching your head as to why the damn thing isn't working only to learn sometime down the road that you needed to connect it to a USB2 connection. Maybe doing so by accident where finally the device works.. this was that....well, I knew already I required a USB 2 type of hub/ connection...this serves the job right... the quality is good..it's no machined aluminum but, looks and eels of quality.. I've had mine now for a bit of time and no issues..still looks relatively new. If I had a need for another, this would be my first choice.

Daha yeni geldi tek çalışan 1.si 2-3-4. girişler temassızlık yapıyor hiç beğenmedim. Lütfen almayın. Bana güvenin gerçekten çok kötü.